Ice Dam Removal in Solon, Ohio

What is the fastest way to remove an ice dam in Solon?

Low-pressure steam is the only method that removes a dam quickly without damaging the roof. Steam melts the ice free of the shingle surface at roughly 250°F and near-zero pressure, so the granule surface, the flashing and the gutter all survive the process. A typical Solon dam clears in two to five hours depending on its length and roof access.

When water is already entering the building, the crew opens relief channels through the dam first. That gives the trapped meltwater a path off the roof within the first half hour, which stops the interior damage from spreading while the rest of the ice comes off.

Why not chip the ice off, or throw salt on the roof?

Every alternative to steam trades roof damage for speed, and the damage usually costs more than the removal did. Here is what each one actually does:

Most shingle manufacturers will not honour a warranty claim on a roof that was chipped or pressure-washed. Steam is the method that keeps the warranty intact.

How do I know the ice dam is leaking into the house?

Water from a dam rarely appears directly under the eave. It travels along the top of the ceiling drywall and shows up several feet inside the room. Watch for these signs:

• A brown ring or damp patch on the ceiling, usually near an exterior wall
• Peeling paint or bubbling at the top of a wall
• Damp or compressed insulation in the attic above the eave line
• Icicles hanging behind the gutter rather than off its front lip
• A visible ridge of ice sitting on the roof several feet above the gutter

Once water is inside, the clock matters. Wet insulation loses most of its R-value, and drywall that stays damp for more than a couple of days is a mould question rather than a drying question.

What does the crew do when it arrives in Solon?

The sequence is the same on every job, and it is documented as it happens:

• Assess and photograph. The crew locates the dam, the meltwater entry point and any pre-existing damage before anything is touched.
• Open relief channels. If water is entering the building, drainage paths come first.
• Steam the dam clear. The ice is removed from the eave, the valleys and behind the gutter line.
• Clear the drainage path. Gutters and downspouts are opened so the next melt has somewhere to go.
• Hand over documentation. Before, during and after photographs plus a written scope, which is what a carrier needs to process the claim.

Ice Dam Removal near Solon — free estimate

Call (330) 918-1018 for a real arrival slot, or request a quote below. Written price before work starts, photographs of everything.

Other services in Solon, OH

Back to Solon services or all Ohio locations.

Ice Dam Removal in Solon — common questions